作者:未知     来源:网络

/*写汉字液晶子程  液晶屏分为4行*12列汉字，全部使用模拟接口方式。
/*   TGLCMLIMIT64A接口程序（模拟方式）
液晶模块供应商：广州市盛宝电子有限公司 Tel:020-87592491  Fax:87541571
Email: tinsharp@public.guangzhou.gd.cn
;***************************************************************************
;连线图:
;*LCM---89C52*    *LCM---89C52*      *LCM-------89C52*          *LCM----------89C52*  *
;*DB0---P0.0*      *DB4---P0.4*        *D/I-------P2.6*            *CS1----------P2.4*    *
;*DB1---P0.1*      *DB5---P0.5*        *R/W-------P2.7*            *CS2----------P2.5*    *
;*DB2---P0.2*      *DB6---P0.6*        *RST--------VCC*            *CS3----------P3.2*    *
;*DB3---P0.3*      *DB7---P0.7*        *E---------P2.3*                                                      *
;注:89C52的晶振频率为12MHz                                                                                                  *
;***************************************************************************/
//画线部分请参照avr的c程序。
/*#pragma  src /*生成ASM文件开关,必要时打开 */
＃i nclude<REG52.H>
＃i nclude<math.h>
＃i nclude<INTRINS.H>

#define Uchar  unsigned  char

/***********液晶显示器接口引脚定义***************/

sbit Elcm= P2^3; //
sbit CS1LCM= P2^4; //
sbit CS2LCM= P2^5; //
sbit CS3LCM= P3^2; /*这个连接只是做实验的临时接法。*/
sbit Dilcm= P2^6; //
sbit Rwlcm= P2^7; //
sfr  Datalcm= 0x80; //数据口
unsigned  char  testi[]={"浸渠叁绳漱塔烃威牺晓玄瑶"};

/***********常用操作命令和参数定义***************/
#define   DISPON 0x3f /*显示on */
#define   DISPOFF 0x3e /*显示off */
#define   DISPFIRST 0xc0 /*显示起始行定义 */
#define   SETX 0x40 /*X定位设定指令（页） */
#define   SETY 0xb8 /*Y定位设定指令（列） */
#define   Lcdbusy 0x80 /*LCM忙判断位 */

/**************显示分区边界位置*****************/
#define   MODL 0x00 /*左区 */
#define   MODM 0x40 /*左区和中区分界 */
#define   MODR 0x80 /*中区和右区分界 */
#define LCMLIMIT 0xC0 /*显示区的右边界 */

/****************全局变量定义*******************/
Uchar  col,row,cbyte; /*列x,行(页)y,输出数据 */
bit  xy; /*画线方向标志：1水平 */

/*****************函数列表**********************/
void  Lcminit(void); /*液晶模块初始化 */
void  Delay(Uchar); /*延时，入口数为Ms */
void  lcdbusyL(void); /*busy判断、等待(左区) */
void  lcdbusyM(void); /*busy判断、等待(中区) */
void  lcdbusyR(void); /*busy判断、等待(右区) */
void  Putedot(Uchar); /*半角字符输出 */
void  Putcdot(Uchar); /*全角(汉字)输出 */
void  Wrdata(Uchar); /*数据输出给LCM */
void  Lcmcls(  void  ); /*LCM全屏幕清零(填充0) */
void  wtcom(void); /*公用busy等待 */
void  Locatexy(void); /*光标定位 */
void  WrcmdL(Uchar); /*左区命令输出 */
void  WrcmdM(Uchar); /*中区命令输出 */
void  WrcmdR(Uchar); /*右区命令输出 */
void  Putstr(Uchar  *puts,Uchar  i); /*中英文字符串输出 */
void  Rollscreen(Uchar  x); /*屏幕向上滚动演示 */
void  Rddata(void); /*    从液晶片上读数据 */
void  Linehv(Uchar  length); /*横(竖)方向画线 */
void  point(void); /*打点 */
void  Linexy(Uchar  endx,Uchar  endy);

/******************数组列表*********************/
Uchar  code  Ezk[]; /*ASCII常规字符点阵码表 */
Uchar  code  Hzk[]; /*自用汉字点阵码表 */
Uchar  code  STR1[]; /*自定义字符串 */
Uchar  code  STR2[]; //
Uchar  code  STR3[]; //
Uchar  code  STR4[]; //


/********************************/
/*  演示主程序 */
/********************************/
void  main(void)

{
Uchar  x,y;
col=0;
row=0;
Delay(40); /*延时大约40Ms,等待外设准备好 */
Lcminit(); /*液晶模块初始化，包括全屏幕清屏*/
Putstr(STR2,24); /*第一行字符输出，24字节 */
col=0;
row=2;
Putstr(STR1,12); /*第二行字符输出，12字节 */
col=0;
row=4;
Putstr(STR3,24); /*第三行字符输出，24字节 */
col=0;
row=6;
Putstr(STR4,24); /*第四行字符输出，12字节 */
x=0;
col=0;
row=0;
xy  =  1; /*方向标志。定为水平方向 */
Linehv(192); /*画一条横线(0,0)-(191,0) */
col=0;
row=15;
xy  =  1;
Linehv(192); /*画一条横线(0,15)-(191,15) */
col=0;
row=32;
xy  =  1;
Linehv(192); /*画一条横线(0,32)-(191,32) */
col=0;
row=1;
xy  =  0; /*方向标志。定为垂直方向 */
Linehv(31); /*画一条竖线(0,1)-(0,31) */
col=191;
row=1;
xy  =  0;
Linehv(31); /*画一条竖线(191,1)-(191,31) */
col=0; /*设定斜线的起点坐标 */
row=63;
Linexy(44,31); /*画一段斜线(0,63)-(44,31) */
col=44;
row=31;
Linexy(190,62); /*继续画斜线(44,31)-(191,63) */
while(1){
Rollscreen(y); /*定位新的显示起*/
y++;
y  %=8;
x=testi[y];
Delay(100); /*延时，控制滚动速度 */
};
}


/************************************************/
/*画线。任意方向的斜线，不支持垂直的或水平线 */
/************************************************/

void  Linexy(Uchar  endx,Uchar  endy)
{
register  Uchar  t;
int  xerr=0,yerr=0,delta_x,delta_y,distance;
Uchar  incx,incy;

/*   compute  the  distance  in  both  directions  */
delta_x=endx-col;
delta_y=endy-row;

/*  compute    the  direction  of  the  increment  ,
an  increment  of  "0"  means  either  a  vertical  or  horizontal  lines  */

if(delta_x>0)  incx=1;
else  if(  delta_x==0  )  incx=0;
else  incx=-1;


if(delta_y>0)  incy=1;
else  if(  delta_y==0  )  incy=0;
else  incy=-1;

/*    determine  which  distance  is  greater  */
delta_x  =  cabs(  delta_x  );
delta_y  =  cabs(  delta_y  );

if(  delta_x  >  delta_y  )  distance=delta_x;
else  distance=delta_y;

/*  draw  the  line  */
for(  t=0;t  <=  distance+1;  t++  )  {
point();
xerr  +=  delta_x  ;
yerr  +=  delta_y  ;
if(  xerr  >  distance  )  {
xerr-=distance;
col+=incx;
}
if(  yerr  >  distance  )  {
yerr-=distance;
row+=incy;
}

}
}

/****************************************/
/*画线。只提供X或Y方向的，不支持斜线 */
/****************************************/
void  Linehv(Uchar  length)
{
Uchar  xs,ys;
if  (xy){ys  =  col;
for  (xs=0;xs<length;xs++){
col  =  ys  +  xs;
point();}
}
else {xs  =  row;
for  (ys=0;ys<length;ys++){
row  =  xs  +  ys;
point();}
}
}

/****************************************/
/* 画点 */
/****************************************/

void  point(void)
{
Uchar x1,y1,x,y;
x1=col;
y1=row;
row=y1>>3; /*取Y方向分页地址 */
Rddata();
y=y1&0x07; /*字节内位置计算 */
x=0x01;
x=x<<y; /*移入所画点 */
Wrdata(cbyte|x); /*画上屏幕 */
col=x1; /*恢复xy坐标 */
row=y1;
}

/****************************************/
/* 屏幕滚动定位 */
/****************************************/
void  Rollscreen(Uchar  x)
{
cbyte  =  DISPFIRST|x; /*定义显示起始行为x?*/
WrcmdL(cbyte);
WrcmdM(cbyte);
WrcmdR(cbyte);
}

/****************************************/
/* 一个字串的输出 */
/****************************************/
void  Putstr(Uchar  *puts,Uchar  i)
{
Uchar  j,X;
for  (j=0;j<i;j++)
{
X  =  puts[j];
if  (X&0x80)
{
Putcdot(X&0x7f); /*只保留低7位*/
}
else  Putedot(X-0x20); /*ascii码表从0x20开始*/
}
}

/****************************************/
/*      半角字符点阵码数据输出 */
/****************************************/
void  Putedot(Uchar  Order)
{
Uchar  i,bakerx,bakery; /*共定义4个局部变量 */
int  x; /*偏移量，字符量少的可以定义为UCHAR */
bakerx  =  col; /*暂存x,y坐标，已备下半个字符使用 */
bakery  =  row;
x=Order  *  0x10; /*半角字符，每个字符16字节 */
/*上半个字符输出，8列 */
for(i=0;i<8;i++)
{
cbyte  =  Ezk[x]; /*取点阵码，rom数组 */
Wrdata(cbyte); /*写输出一字节 */
x++;
col++;
if  (col==LCMLIMIT){col=0;row++;row++;}; /*下一列，如果列越界换行*/
if  (row>7)  row=0; /*如果行越界，返回首行 */
} /*上半个字符输出结束 */

col  =  bakerx; /*列对齐 */
row  =  bakery+1; /*指向下半个字符行 */
/*下半个字符输出，8列 */
for(i=0;i<8;i++)
{
cbyte  =  Ezk[x]; /*取点阵码 */
Wrdata(cbyte); /*写输出一字节 */
x++;
col++;
if  (col==LCMLIMIT){col=0;row=row+2;}; /*下一列，如果列越界换行*/
if  (row>7)  row=1; /*如果行越界，返回首行 */
} /*下半个字符输出结束 */
row=bakery;
} /*整个字符输出结束 */


/****************************************/
/*    全角字符点阵码数据输出 */
/****************************************/
void  Putcdot(Uchar  Order)
{
Uchar  i,bakerx,bakery; /*共定义3个局部变量 */
int  x; /*偏移量，字符量少的可以定义为UCHAR */
bakerx  =  col; /*暂存x,y坐标，已备下半个字符使用 */
bakery  =  row;
x=Order  *  0x20; /*每个字符32字节 */

/*上半个字符输出，16列 */
for(i=0;i<16;i++)
{
Wrdata(Hzk[x]); /*写输出一字节 */
x++;
col++;
if  (col==LCMLIMIT){  col=0;row++;row++;} /*下一列，如果列越界换行*/
if  (row>6)  row=0; /*如果行越界，返回首行 */
} /*上半个字符输出结束 */

/*下半个字符输出，16列 */
col  =  bakerx;
row  =  bakery+1;
for(i=0;i<16;i++) /*下半部分*/
{
Wrdata(Hzk[x]);
x++;
col++;
if  (col==LCMLIMIT){col=0;row++;row++;} /*下一列，如果列越界换行*/
if  (row>7)  row=1; /*如果行越界，返回首行 */
} /*下半个字符输出结束 */
row  =  bakery;
} /*整个字符输出结束 */

/****************************************/
/* 清屏，全屏幕清零 */
/****************************************/
void  Lcmcls(  void  )
{
for(row=0;row<8;row++)
for(col=0;col<LCMLIMIT;col++)  Wrdata(0);
}

/****************************************/
/*    从液晶片上读数据，保留在全局变量中 */
/****************************************/

void  Rddata(void)
{
Locatexy(); /*坐标定位，返回时保留分区状态不变 */
Datalcm=0xFF;
Dilcm  =  1; /*数据*/
Rwlcm  =  1; /*读数据*/
Elcm  =  1; /*读入到LCM*/
_nop_();
cbyte  =  Datalcm; /*虚读一次  */
Elcm  =  0;
Locatexy(); /*坐标定位，返回时保留分区状态不变 */
Datalcm=0xFF;
_nop_();
Dilcm  =  1; /*数据*/
Rwlcm  =  1; /*读数据*/
Elcm  =  1; /*读入到LCM*/
_nop_();
cbyte  =  Datalcm; /*从数据口读数据，真读  */
Elcm  =  0;
}

/****************************************/
/* 数据写输出 */
/****************************************/

void  Wrdata(Uchar  X)
{
Locatexy(); /*坐标定位，返回时保留分区状态不变 */
// wtcom();
Dilcm  =  1; /*数据输出*/
Rwlcm  =  0; /*写输出    */
Datalcm  =  X; /*数据输出到数据口  */
Elcm  =  1; /*读入到LCM*/
_nop_();
Elcm  =  0;
}

/****************************************/
/*  命令输出，每次输出一个分区控制口 */
/****************************************/

/*void  Wrcmd(Uchar  X)
// {
// Locatexy(); /*确定分区，返回时保留分区状态不变 */
// wtcom(); /*等待LCM操作允许 */
// Dilcm  =  0; /*数据操作 */
// Rwlcm  =  0; /*写输出     */
// Datalcm  =  X; /*数据输出到数据口  */
// Elcm  =  1;_nop_();Elcm  =  0; /*读入到LCM*/
// }

/********************************/
/*  命令输出到左区控制口 */
/********************************/

void  WrcmdL(Uchar  X)
{
lcdbusyL(); /*确定分区，返回时保留分区状态不变*/
Dilcm  =  0; /*命令操作 */
Rwlcm  =  0; /*写输出     */
Datalcm  =  X; /*数据输出到数据口  */
Elcm  =  1;_nop_();Elcm  =  0; /*读入到LCM*/
}

/********************************/
/*  命令输出到中区控制口 */
/********************************/

void  WrcmdM(Uchar  X)
{
lcdbusyM(); /*确定分区，返回时保留分区状态不变*/
Dilcm  =  0; /*命令操作 */
Rwlcm  =  0; /*写输出     */
Datalcm  =  X; /*命令输出到数据口  */
Elcm  =  1;_nop_();Elcm  =  0; /*读入到LCM*/
}

/********************************/
/*  命令输出到右区控制口 */
/********************************/

void  WrcmdR(Uchar  X)
{
lcdbusyR(); /*确定分区，返回时保留分区状态不变 */
Dilcm  =  0; /*命令操作 */
Rwlcm  =  0; /*写输出     */
Datalcm  =  X; /*命令输出到数据口  */
Elcm  =  1;_nop_();Elcm  =  0; /*读入到LCM*/
}

/********************************************************/
/*  分区操作允许等待,返回时保留分区选择状态 */
/********************************************************/
void  lcdbusyL(void)
{
CS1LCM  =  0; /*CLR CS1 */
CS2LCM  =  1; /*SETB CS2 */
CS3LCM  =  1; /*SETB CS3 */
wtcom(); /*  waitting  for  enable */
}

void  lcdbusyM(void)
{
CS1LCM  =  1; /*SETB CS1 */
CS2LCM  =  0; /*CLR CS2 */
CS3LCM  =  1; /*SETB CS3 */
wtcom(); /*  waitting  for  enable */
}

void  lcdbusyR(void)
{
CS1LCM  =  1; /*SETB CS1 */
CS2LCM  =  1; /*SETB CS2 */
CS3LCM  =  0; /*CLR CS3 */
wtcom(); /*  waitting  for  enable */
}

void  wtcom(void)
{
Dilcm  =  0; /*CLR DI */
Rwlcm  =  1; /*SETB RW */
Datalcm  =  0xFF; /* MOVDATA_LCM,#0FFH    */
Elcm    =  1;_nop_();
while(Datalcm  &  Lcdbusy);
Elcm    =  0;
}

/********************************************************/
/*根据设定的坐标数据，定位LCM上的下一个操作单元位置 */
/********************************************************/
void  Locatexy(void)
{
unsigned  char    x,y;
switch  (col&0xc0) /*    col.and.0xC0 */
{ /*条件分支执行 */
case  0: {lcdbusyL();break;} /*左区 */
case  0x40: {lcdbusyM();break;} /*中区 */
case  0x80: {lcdbusyR();break;} /*右区 */
}
x  =  col&0x3F|SETX; /*    col.and.0x3f.or.setx */
y  =  row&0x07|SETY; /*    row.and.0x07.or.sety */
wtcom(); /*    waitting  for  enable */
Dilcm  =  0; /*CLR DI */
Rwlcm  =  0; /*CLR RW */
Datalcm  =  y; /*MOVP0,Y */
Elcm  =  1;_nop_();Elcm  =  0;
wtcom(); /*    waitting  for  enable */
Dilcm  =  0; /*CLR DI */
Rwlcm  =  0; /*CLR RW */
Datalcm  =  x; /*MOVP0,X */
Elcm  =  1;_nop_();Elcm  =  0;
}

/********************************/
/*液晶屏初始化 */
/********************************/

void  Lcminit(void)
{
cbyte  =  DISPOFF; /*关闭显示屏 */
WrcmdL(cbyte);
WrcmdM(cbyte);
WrcmdR(cbyte);
cbyte  =  DISPON; /*打开显示屏 */
WrcmdL(cbyte);
WrcmdM(cbyte);
WrcmdR(cbyte);
cbyte  =  DISPFIRST; /*定义显示起始行为零 */
WrcmdL(cbyte);
WrcmdM(cbyte);
WrcmdR(cbyte);
Lcmcls();
col=0; /*清屏 */
row=0;
Locatexy();
}
/********************************/
/*  延时 */
/********************************/
void  Delay(Uchar  MS)
{
Uchar  us,usn;
while(MS!=0)
{  usn  =  4;
while(usn!=0)
{
us=0xf0;
while  (us!=0){us--;};
usn--;
}
MS--;
}
}

/********************************/
//定义字符串数组 */
/********************************/

Uchar  code  STR1[]=
{
0x80,0x81,0x82,0x83,0x84,0x85,
0x86,0x87,0x88,0x89,0x8a,0x8B
};

Uchar  code  STR2[]="Our  friend  over  the  wold";
Uchar  code  STR3[]="Program  by  Keil  C51  6.12";
Uchar  code  STR4[]="Thank  you  ~v~  1234567890";

/********************************/
/*    定义中文字库 */
/********************************/

Uchar  code  Hzk[]={
/*茂  C3515 0 */
0x04,0x04,0xC4,0x44,0x5F,0x44,0x44,0xF4,
0x44,0x4F,0x54,0x64,0x44,0x46,0x04,0x00,
0x80,0x40,0x3F,0x00,0x40,0x40,0x20,0x20,
0x13,0x0C,0x18,0x24,0x43,0x80,0xE0,0x00,
/*兴  C4843 1 */
0x00,0xFE,0x4A,0x4A,0x00,0xFE,0xEA,0xAA,
0xAA,0xFE,0x00,0x4A,0x4A,0xFE,0x00,0x00,
0x02,0x83,0x42,0x22,0x12,0x1B,0x02,0x02,
0x02,0x0B,0x12,0x22,0x62,0xC3,0x02,0x00,
/*国  C2590 2 */
0x00,0xFE,0x02,0xD2,0x52,0x52,0xD2,0x3E,
0xD2,0x16,0x1A,0x12,0xFF,0x02,0x00,0x00,
0x00,0xFF,0x50,0x53,0x52,0x4A,0x6B,0x50,
0x4F,0x54,0x7B,0x40,0xFF,0x00,0x00,0x00,
/*际  C2842 3 */
0x00,0xFE,0x22,0xD2,0x0E,0x20,0xB8,0x4F,
0xB2,0x9E,0x80,0x9F,0x72,0x8A,0x06,0x00,
0x00,0xFF,0x04,0x08,0x07,0x21,0x12,0x0A,
0x46,0x82,0x7E,0x06,0x0A,0x12,0x31,0x00,
/*（  C0308 4 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0xC0,0x30,0x08,0x04,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x03,0x0C,0x10,0x20,0x40,0x00,0x00,
/*广  C2567 5 */
0x00,0x00,0xFC,0x44,0x54,0x54,0x7C,0x55,
0xD6,0x54,0x7C,0x54,0x54,0x44,0x44,0x00,
0x80,0x60,0x1F,0x80,0x9F,0x55,0x35,0x15,
0x1F,0x15,0x15,0x35,0x5F,0x80,0x00,0x00,
/*东  C2211 6 */
0x00,0x08,0xE8,0xA8,0xA8,0xA8,0xA8,0xFF,
0xA8,0xA8,0xA8,0xA8,0xE8,0x0C,0x08,0x00,
0x00,0x40,0x23,0x12,0x0A,0x06,0x02,0xFF,
0x02,0x06,0x0A,0x12,0x23,0x60,0x20,0x00,
/*）  C0309 7 */
0x00,0x00,0x02,0x04,0x08,0x30,0xC0,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x40,0x20,0x10,0x0C,0x03,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*有  C5148 8 */
0x04,0x04,0x04,0x84,0xE4,0x3C,0x27,0x24,
0x24,0x24,0x24,0xF4,0x24,0x06,0x04,0x00,
0x04,0x02,0x01,0x00,0xFF,0x09,0x09,0x09,
0x09,0x49,0x89,0x7F,0x00,0x00,0x00,0x00,
/*限  C4762 9 */
0x00,0xFE,0x02,0x22,0xDA,0x06,0x00,0xFE,
0x92,0x92,0x92,0x92,0xFF,0x02,0x00,0x00,
0x00,0xFF,0x08,0x10,0x08,0x07,0x00,0xFF,
0x42,0x24,0x08,0x14,0x22,0x61,0x20,0x00,
/*公  C2511 10 */
0x00,0x00,0x80,0x40,0x30,0x0C,0x00,0xC0,
0x07,0x1A,0x20,0x40,0x80,0x80,0x80,0x00,
0x01,0x01,0x20,0x70,0x28,0x24,0x23,0x20,
0x20,0x28,0x30,0x60,0x00,0x01,0x00,0x00,
/*司  C4330 11 */
0x10,0x10,0x92,0x92,0x92,0x92,0x92,0x92,
0xD2,0x9A,0x12,0x02,0xFF,0x02,0x00,0x00,
0x00,0x00,0x3F,0x10,0x10,0x10,0x10,0x10,
0x3F,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,
};
/****************************************/
/*  定义ASCII字库8列*16行 */
/****************************************/

Uchar  code  Ezk[]={
/*-文字:  --0x20 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:!--0x21 */
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x27,0x00,0x00,0x00,0x00,
/*-文字:"--0x22 */
0x00,0x08,0x04,0x02,0x08,0x04,0x02,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:#--0x23 */
0x40,0x40,0xF8,0x40,0x40,0xF8,0x40,0x00,
0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,
/*-文字:$--0x24 */
0x00,0x70,0x88,0xFC,0x08,0x08,0x30,0x00,
0x00,0x1C,0x20,0xFF,0x21,0x22,0x1C,0x00,
/*-文字:%--0x25 */
0xF0,0x08,0xF0,0x80,0x70,0x08,0x00,0x00,
0x00,0x31,0x0E,0x01,0x1E,0x21,0x1E,0x00,
/*-文字:&--0x26 */
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
0x1E,0x21,0x23,0x24,0x18,0x16,0x20,0x00,
/*-文字:'--0x27 */
0x20,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:(--0x28 */
0x00,0x00,0x00,0x00,0xC0,0x30,0x08,0x04,
0x00,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,
/*-文字:)--0x29 */
0x04,0x08,0x30,0xC0,0x00,0x00,0x00,0x00,
0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,
/*-文字:*--0x2a */
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,
/*-文字:+--0x2b */
0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x0F,0x01,0x01,0x01,0x00,
/*-文字:,--0x2c */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x60,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:---0x2d */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
/*-文字:.--0x2e */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:/--ox2f */
0x00,0x00,0x00,0x00,0x00,0xE0,0x18,0x04,
0x00,0x40,0x30,0x0C,0x03,0x00,0x00,0x00,
/*-文字:0--0x30 */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:1--0x31 */
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
/*-文字:2--0x32 */
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
/*-文字:3--0x33 */
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:4--0x34 */
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*-文字:5--0x35 */
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,
/*-文字:6--0x36 */
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,
/*-文字:7--0x37 */
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:8--0x38 */
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*-文字:9--0x39 */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,
/*-文字::-- */
0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,
0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
/*-文字:/-- */
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,
/*-文字:<-- */
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,
/*-文字:=-- */
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,
/*-文字:>-- */
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,
/*-文字:?-- */
0x00,0x30,0x08,0x08,0x08,0x88,0x70,0x00,
0x00,0x00,0x00,0x26,0x01,0x00,0x00,0x00,
/*-文字:@-- */
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
0x07,0x18,0x27,0x28,0x27,0x28,0x07,0x00,
/*-文字:A-- */
0x00,0x00,0xE0,0x18,0x18,0xE0,0x00,0x00,
0x30,0x0F,0x04,0x04,0x04,0x04,0x0F,0x30,
/*-文字:B-- */
0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
0x3F,0x21,0x21,0x21,0x21,0x12,0x0C,0x00,
/*-文字:C-- */
0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
0x0F,0x10,0x20,0x20,0x20,0x10,0x0C,0x00,
/*-文字:D-- */
0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
0x3F,0x20,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:E-- */
0x00,0xF8,0x08,0x08,0x08,0x08,0x08,0x00,
0x00,0x3F,0x21,0x21,0x21,0x21,0x20,0x00,
/*-文字:F-- */
0xF8,0x08,0x08,0x08,0x08,0x08,0x08,0x00,
0x3F,0x01,0x01,0x01,0x01,0x01,0x00,0x00,
/*-文字:G-- */
0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
0x0F,0x10,0x20,0x20,0x21,0x11,0x3F,0x00,
/*-文字:H-- */
0x00,0xF8,0x00,0x00,0x00,0x00,0xF8,0x00,
0x00,0x3F,0x01,0x01,0x01,0x01,0x3F,0x00,
/*-文字:I-- */
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:J-- */
0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
0x00,0x1C,0x20,0x20,0x20,0x20,0x1F,0x00,
/*-文字:K-- */
0x00,0xF8,0x00,0x80,0x40,0x20,0x10,0x08,
0x00,0x3F,0x01,0x00,0x03,0x04,0x18,0x20,
/*-文字:L-- */
0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
/*-文字:M-- */
0xF8,0xE0,0x00,0x00,0x00,0xE0,0xF8,0x00,
0x3F,0x00,0x0F,0x30,0x0F,0x00,0x3F,0x00,
/*-文字:N-- */
0x00,0xF8,0x30,0xC0,0x00,0x00,0xF8,0x00,
0x00,0x3F,0x00,0x01,0x06,0x18,0x3F,0x00,
/*-文字:O-- */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:P-- */
0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
0x3F,0x02,0x02,0x02,0x02,0x01,0x00,0x00,
/*-文字:Q-- */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x2C,0x10,0x2F,0x00,
/*-文字:R-- */
0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
0x3F,0x01,0x01,0x01,0x07,0x18,0x20,0x00,
/*-文字:S-- */
0x60,0x90,0x88,0x08,0x08,0x10,0x20,0x00,
0x0C,0x10,0x20,0x21,0x21,0x12,0x0C,0x00,
/*-文字:T-- */
0x08,0x08,0x08,0xF8,0x08,0x08,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:U-- */
0xF8,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:V-- */
0x18,0xE0,0x00,0x00,0x00,0xE0,0x18,0x00,
0x00,0x01,0x0E,0x30,0x0E,0x01,0x00,0x00,
/*-文字:W-- */
0xF8,0x00,0xC0,0x38,0xC0,0x00,0xF8,0x00,
0x03,0x3C,0x03,0x00,0x03,0x3C,0x03,0x00,
/*-文字:X-- */
0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
0x20,0x18,0x06,0x01,0x06,0x18,0x20,0x00,
/*-文字:Y-- */
0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:Z-- */
0x08,0x08,0x08,0x08,0xC8,0x28,0x18,0x00,
0x30,0x2C,0x22,0x21,0x20,0x20,0x20,0x00,
/*-文字:{-- */
0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:\-- */
0x00,0x08,0x70,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x0E,0x30,0xC0,0x00,
/*-文字:}-- */
0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:^-- */
0x00,0x08,0x04,0x02,0x02,0x04,0x08,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:_-- */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
/*-文字:`-- */
0x00,0x00,0x02,0x06,0x04,0x08,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:a-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x19,0x24,0x24,0x24,0x14,0x3F,0x00,
/*-文字:b-- */
0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x3F,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:c-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x0E,0x11,0x20,0x20,0x20,0x20,0x11,0x00,
/*-文字:d-- */
0x00,0x00,0x80,0x80,0x80,0x00,0xF8,0x00,
0x00,0x1F,0x20,0x20,0x20,0x11,0x3F,0x00,
/*-文字:e-- */
0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
0x0E,0x15,0x24,0x24,0x24,0x25,0x16,0x00,
/*-文字:f-- */
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:g-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
0x40,0xB7,0xA8,0xA8,0xA8,0xA7,0x40,0x00,
/*-文字:h-- */
0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:i-- */
0x00,0x00,0x00,0x98,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:j-- */
0x00,0x00,0x00,0x00,0x98,0x00,0x00,0x00,
0x00,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,
/*-文字:k-- */
0x00,0xF8,0x00,0x00,0x00,0x80,0x00,0x00,
0x00,0x3F,0x04,0x02,0x0D,0x10,0x20,0x00,
/*-文字:l-- */
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:m-- */
0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,
0x3F,0x00,0x00,0x3F,0x00,0x00,0x3F,0x00,
/*-文字:n-- */
0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:o-- */
0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
0x0E,0x11,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:p-- */
0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0xFF,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:q-- */
0x00,0x00,0x80,0x80,0x80,0x00,0x80,0x00,
0x00,0x1F,0x20,0x20,0x20,0x11,0xFF,0x00,
/*-文字:r-- */
0x00,0x00,0x80,0x00,0x00,0x80,0x80,0x00,
0x00,0x00,0x3F,0x01,0x01,0x00,0x00,0x00,
/*-文字:s-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x13,0x24,0x24,0x24,0x24,0x19,0x00,
/*-文字:t-- */
0x00,0x80,0x80,0xE0,0x80,0x80,0x80,0x00,
0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x00,
/*-文字:u-- */
0x00,0x80,0x00,0x00,0x00,0x00,0x80,0x00,
0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x00,
/*-文字:v-- */
0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
0x00,0x07,0x18,0x20,0x18,0x07,0x00,0x00,
/*-文字:w-- */
0x80,0x00,0x00,0x80,0x00,0x00,0x80,0x00,
0x0F,0x30,0x0E,0x01,0x0E,0x30,0x0F,0x00,
/*-文字:x-- */
0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
0x20,0x11,0x0A,0x04,0x0A,0x11,0x20,0x00,
/*-文字:y-- */
0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
0x00,0x87,0x98,0x60,0x18,0x07,0x00,0x00,
/*-文字:z-- */
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
0x00,0x30,0x28,0x24,0x22,0x21,0x20,0x00,
/*-文字:{-- */
0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:|-- */
0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
/*-文字:}-- */
0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:~-- */
0x00,0x06,0x01,0x01,0x06,0x04,0x03,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};